Microtek ArtixScan 4500t Specifications download pdf (Page 6)

2 ArtixScan 4500t Installation and Operation Manual

English

General Requirements

Before unpacking your scanner, make sure that the site where the scanner will be

installed is big enough to allow for easier operation.

• Make sure that the operating environment for the scanner is free of dust and other

contaminants.

• Allow adequate ventilation space (no less than 2 inches) around the scanner.

• Place the scanner on a flat, stable surface that is not subject to vibration.

• Make sure that the scanning surface will not be exposed to direct sunlight or other

sources of bright light.

• Avoid placing the scanner close to sources of extreme temperature.

• Try to ensure the scanner is situated in its ideal operating temperature range -- between

60° and 104°F (10°C and 40°C).

• Keep the relative humidity in the scanner operating area between 10% and 85%.

• Avoid connecting the scanner to a power source that might experience power surges.

• Avoid positioning the scanner in the path of heavy traffic where it may get bumped.

• Your scanner should be placed within 3 feet of the computer. Use the SCSI cable that

came with your scanner.

Once the scanner has been placed in a suitable location and is ready to be connected to

the host computer, it is time to proceed to installing the necessary hardware and software

components for the scanner.

Minimum Macintosh requirements

• Apple Power Mac with PCI bus (150 MHz)

• Apple Macintosh system software version 8.5 or higher

• CD-ROM drive

• 64MB of available RAM (128 MB recommended)

• Color monitor at least 17" with 24-bit color display ability

Minimum PC requirements

• Pentiums, or compatibles with a CD-ROM drive

• 64MB RAM for full version of Photoshop (128 MB recommended)

• Microsoft Windows 95/98/NT4/2000

• VGA color monitor; color display card; laser printer (recommended). Photoshop

requires a monitor and display card capable of displaying at least 256 colors.

• Basic knowledge of Windows, and how to install an interface card inside the PC.

1 2 3 4 5 6 7 8 9 10 11 ... 37 38

No comments

Microtek ArtixScan 4500t Specifications Page 6