Microtek ArtixScan 4500t Specifications download pdf (Page 15)

ArtixScan 4500t Installation and Operation Manual 11

English

Step 3: Using terminator

If you are connecting the scanner in a daisy chain to other SCSI devices (such as a CD-

ROM drive), take note of the following:

1. If the scanner is the last device on the SCSI chain, set the internal terminator switch on

the back of the scanner to the “ON” position. There is no need to install an external

terminator on any of the other SCSI devices on the chain.

OFF

2. If the scanner is not the last device on the SCSI chain:

• Make sure the internal terminator switch located at the back of the scanner is set to

the “OFF” position.

• Make sure the last device on the SCSI chain is terminated.

Step 4: Installing the software

For the Macintosh

Insert the ScanWizard Pro CD-ROM into your CD-ROM drive. When the CD-ROM icon

appears on your Macintosh desktop, open the software folders individually, then double-

click the Installer icon on each folder to install the respective programs one at a time.

For the PC

Insert the ScanWizard Pro CD-ROM into your CD-ROM drive; the Scanner Software

installer should come up automatically.

Note: If the Scanner Software is not automatically displayed, click

StarStar

Star

t, select

RunRun

Run and type

d:\cdsetup (where d: is your CD-ROM drive).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

No comments

Microtek ArtixScan 4500t Specifications Page 15