Microtek ArtixScan 4500t Specifications download pdf (Page 34)

30 ArtixScan 4500t Installation and Operation Manual

English

6 Troubleshooting

Introduction

This Troubleshooting guide discusses the SCSI cards that work with Microtek scanner.

Available SCSI cards are Adaptec 2902, 2903, 2906 and AdvanSys 902 card.

Questions and Answers for Windows 95/98/2000

Q1: The SCSI card cannot be found by Windows 98.

A1:

Your interface card is not properly seated in the PCI card slot on your computer.

To fix this problem, power down your computer, remove the SCSI interface card from

your computer. Then reinstall it, make sure the card is seated all the way in and secured

into the PCI card slot. The PCI card slot normally appears in white or ivory.

Q2: My interface card conflicts with another device.

A2:

Follow the steps below:

1. Click

StartStart

Start,

SettingsSettings

Settings, and select

Control PanelControl Panel

Control Panel.

2. Double-click on the

System System

System icon in Control Panel and select

Device ManagerDevice Manager

Device Manager from the

top.

3. Double-click on “

SCSI controllersSCSI controllers

SCSI controllers” to display the dialog box. A yellow exclamation

mark appears next to the detected SCSI device.

4. Click on the option that has the yellow exclamation mark appeared at the left, and then

click

PropertiesProperties

Properties.

5. Select

ResourcesResources

Resources from the top. The dialog box gives you information about the

Interrupt Request (IRQ) and Input/Output (I/O) address settings, including whether a

conflict happens.

6. If a conflict exists in Input/Output option, then click

Change SettingChange Setting

Change Setting. Use the Up/Down arrow keys to select

a different range.

1 2 ... 29 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments

Microtek ArtixScan 4500t Specifications Page 34

Comments to this Manuals

Related products and manuals for Scanner Transparancy Adapters Microtek ArtixScan 4500t