Microtek ArtixScan 4500t Specifications download pdf (Page 28)

24 ArtixScan 4500t Installation and Operation Manual

English

Reference Section for Macintosh

This section describes the features and commands of the Microtek Scanner ICC Profiler

program. All features are covered in the Menu commands, the Main window, and the

Calibration window.

A. Menu commands

1. Apple Menu — About ICC Profiler: Choose the About ICC Profiler command from

your Apple menu to display the splash screen for the Scanner ICC Profiler program.

The screen includes the product logo and the software version number

2. Scanner Menu: The Scanner Menu lets you see information on your current scanner

and your SCSI chain.

a) Find Plug-in: This command lets you choose the correct ScanWizard Pro Plug-in

driver for the ICC Profiler program (in case the

Plug-in driver cannot be found).

b) Get Current Scanner Info: This command pro-

vides information on the current scanner. A dialog

box appears showing the scanner model in use,

the SCSI ID number of the scanner, and the

firmware version of the scanner.

c) Scanner Probe: This command displays the SCSI

devices on the SCSI chain, as well as the SCSI ID

numbers of the individual devices.

To use this command:

1. Choose the Get SCSI Chain Info command.

2. If your scanner does not show in the list, make sure

it is connected and turned on, then click on the Probe button in the dialog box.

• Choose the correct interface card in the card selection box.

• Check the numbered box corresponding to the SCSI ID of your scanner. Click OK to

close the dialog box

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 37 38

No comments

Microtek ArtixScan 4500t Specifications Page 28