Microtek ArtixScanDI 2020 Plus User Manual download pdf (Page 45)

ArtixScan DI 4020 Plus/ArtixScan DI 2020 Plus User's Manual 45

Replacing the Feed-Roller Assembly

1. Press the button at the top of the ADF, then move the cover of the feeder up

to see the feed-roller assembly, as indicated in the graphic below.

2. With the cover fully opened, loosen the screw on the cover with a

screwdriver, and pull out the feed-roller assembly carefully.

Feed-Roller Assembly

3. Insert and push down the new feed-roller assembly into its compartment,

making sure the feed-roller assembly snaps into place. Tighten the screw

back on the cover.

4. Make sure the feed-roller assembly is attached to the feed cover properly, then

close the feed cover.

Note: The recommended replacement point for your feed-roller assembly is after

scanning approximately 150,000 sheets through the ADF.

1 2 ... 40 41 42 43 44 45 46 47 48

No comments

Microtek ArtixScanDI 2020 Plus User Manual Page 45