Microtek ScanMaker 5 User's Guide download pdf (Page 40)

4-8 Microtek ScanWizard 5

Intended Size of Output Image

By default, SW 5-Standard scans your original

into an actual size (100%) output image. To

change the output image dimension, click on the

Scale Output button. From the resulting menu,

select the predefined scaled size that best

matches your intended image output dimension.

Improving Image Before Final Scan

When you scan your original image without

making any adjustments of your own, SW 5-

Standard will auto process to enhance the

quality of your digitized image by using its

default image editing settings. If you are not

satisfied with what SW 5-Standard has done for

you (as reflected in the preview image), you

may modify the default artwork and apply your

own image manipulation before final scanning

by using the image correction tools panel under

the

Adjust button.

Click the

Adjust button. When the image

correction panel displays, adjust the preview

image by dragging the pellet button of each tool

along its groove. Observe a live update taking

place with your preview image as you

manipulate each of the image

correction tools. To reset a correction tool back to its original position, click on

the reset icon at right end of each tool (see figure at right).

Note that the new settings are automatically saved and will remain in effect for

the subsequent scanning sessions (after a reboot) unless otherwise redefined or

if they are reset to default settings (as explained in the following section).

Reset icon. Use this icon

to individually reset the

adjustment you have made

to each image correction

tool, back to its default

setting.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 221 222

No comments

Microtek ScanMaker 5 User's Guide Page 40