Microtek ArtixScan DI 2125c User Manual download pdf (Page 40)

40 ArtixScan DI 2125c User's Manual

3. Tilt the scanner slightly on its back side to locate the Feed Roller Assembly.

Push it up a bit at the bottom and then hold the both sides of it to pull it out

carefully from its compartment.

4. Insert the new Feed Roller Assembly

into its compartment;

a) snaps the notches on the two

sides of the Feed Roller

Assembly onto the shafts on the

two sides of the compartment.

b) Finally, push down the Feed

Roller Assembly flat into its

compartment.

5. Put the roller cover back and tighten the screws to lock the roller cover at the

bottom of the scanner.

Note:

• The recommended replacement point for your Feed Roller Assembly is after

scanning approximately 30,000 sheets through the feeder.

• Please contact your local resellers for purchasing new Feed Roller Assembly.

1 2 ... 35 36 37 38 39 40 41 42 43 44

No comments

Microtek ArtixScan DI 2125c User Manual Page 40