Microtek ScanPotter Specifications download pdf (Page 21)

Microtek ScanPotter Reference Manual 17

Scanner Settings

Scanner Settings section let you specify scanning requirements in the ScanPotter

control panel once ScanPotter is launched.

Scan Source

Depending on the scanner model you are using, you should see different groups

of Scan Source. If you are using a scanner with a built-in ADF and a glass

scanner bed, the Scan Source you see will let you select image input device, such

as Automatic, ADF and Flatbed. When you select the "Automatic" as your scan

source, the scanner will scan from the ADF if the system detects papers on the

ADF; otherwise, it will scan from the scan bed.

On the other hand, if your scanner equipped with only a glass scanner bed, the

Scan Source you see will let you select scanned materials. For example, if you

are using the ScanMaker i800XL Plus, you can select either Reflective, Positive

Film or Negative Film as your scan source depending on which kinds of

materials you use to scan.

To select a scan source, click the drop-down menu in the Scan Source option

and point the mouse (cursor) to the option desired.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

No comments

Microtek ScanPotter Specifications Page 21